Toilet Repair and Replacement in Forney & Dallas

If your toilet continues to run long after flushing, it's usually due to a faulty flapper, fill valve, or float. These internal components wear down over time and cause water to flow continuously into the tank or bowl, often increasing water bills without your knowledge.

PlumbTex replaces these parts using durable, brand-specific hardware to restore proper function and water conservation.

A weak flush often indicates a blockage in the trapway, clogged rim jets, or a problem with the tank’s water level. We inspect the bowl and tank for obstructions, clean mineral deposits from rim holes, and adjust the water level to ensure the toilet flushes with full power.

In cases where the toilet design or internal mechanics are outdated, we may recommend replacing the entire unit with a more efficient model.

Water pooling at the base of your toilet may result from a failed wax ring, loose mounting bolts, or a cracked toilet flange. Leaks at this level can damage flooring and lead to mold or wood rot.

We remove the toilet, inspect the floor and flange, replace the wax ring, and securely reinstall the fixture. If the flange is damaged or recessed, we make necessary repairs to ensure a proper seal.

If your tank fills slowly or not at all, the issue could stem from a malfunctioning fill valve, shut-off valve, or sediment buildup in the supply line. We check all components for proper flow, clean or replace the fill valve, and ensure that shut-off valves function correctly.

In older Forney homes, the water supply line may also need replacement to improve flow and prevent future blockage.

If plunging doesn’t solve the problem or if clogs happen repeatedly, the issue may lie deeper in the drain system. We use professional augers to clear blockages or conduct camera inspections to check for obstructions in the drain line. In some cases, toilet replacement is needed if internal passages are worn or partially obstructed.